Free Medical Billing Audit

Guide

Payment Posting in Medical Billing: A Practical Guide

Payment posting in medical billing is the process of recording each payer and patient payment against the right claim, applying contractual adjustments, and moving any remaining balance to the next payer, the patient, or a denial work queue. Done well, it keeps your A/R accurate and exposes denials and underpayments the day they appear. Done poorly, it hides revenue problems inside balances that look closed.

Two team members wearing headsets in a bright office
In this article
  1. What payment posting is and why it matters
  2. Where payments and explanations come from
  3. Reading an ERA or EOB line by line
  4. Claim-level and service-level data
  5. Group codes
  6. CARC and RARC codes
  7. The posting workflow, step by step
  8. Contractual adjustments and allowed amounts
  9. Secondary billing and coordination of benefits
  10. Catching denials and rejections at posting
  11. Underpayment detection
  12. Posting patient payments and credits
  13. Controls: reconciliation and separation of duties
  14. Common posting errors
  15. Metrics for posting quality
  16. Mednex and practice responsibilities
  17. Next steps

What payment posting is and why it matters

Every payment that comes in has to be matched to a specific claim and service line. The biller enters the amount paid, the amount the payer says the practice may not collect (the adjustment), the amount the patient owes, and any denial or reduction codes. The practice management system then updates the claim status and the account balance.

Posting matters for three reasons:

  • Accurate A/R. Your aging report is only as reliable as your posting. If a payment is applied to the wrong claim, one account looks overpaid and another looks unpaid.
  • Denial detection. The remittance is where denials show up first. Posting is the earliest moment to route them to correction or appeal.
  • Underpayment detection. A claim can be paid, adjusted to zero, and still be underpaid compared with your contract. Only a posting review that compares payment to the expected rate catches that.

Posting is one task inside medical billing and sits in the back end of the larger revenue cycle. For how billing and RCM differ, see medical billing vs revenue cycle management.

Where payments and explanations come from

Payments reach the practice through several channels, and each has a matching explanation of benefits.

Source Payment form Explanation document Posting note
Commercial and government payers EFT (electronic funds transfer) deposit ERA, the electronic remittance advice in X12 835 format Match the ERA trace number to the bank deposit before posting
Some payers or small plans Paper check Paper EOB Scan the check and EOB; post manually or through a lockbox service
Virtual credit card payers Card payment, often with processing fees ERA or EOB Record fees separately and review the contract on card fees
Patients Card, cash, check, portal, payment plan Patient statement and receipt Post at the claim or account level according to the practice policy
Secondary and tertiary payers EFT or check ERA or EOB showing crossover details Post only after the primary posts, in the right order

The ERA is the preferred source. It arrives as structured data, so the system can auto-post lines that fit set rules and leave exceptions for a person. The EFT deposit and the ERA are two separate transmissions, and they should agree. A mismatch between the deposit and the ERA total is itself a posting alert.

Reading an ERA or EOB line by line

A biller needs to read a remittance quickly and correctly. These are the pieces that matter.

Claim-level and service-level data

An 835 reports information at the claim level (patient control number, claim status, total charge, total paid, patient responsibility) and at the service line level (procedure code, modifiers, charge, paid amount, adjustments). Always post at the service line when the payer gives line detail, because denials and reductions often apply to individual lines.

Group codes

Each adjustment carries a group code that says who is financially responsible for the amount.

Group code Meaning Posting treatment
CO (contractual obligation) The practice is responsible for the amount; it cannot bill the patient Write off if it is a true contract adjustment; review if it is a denial that could be corrected or appealed
PR (patient responsibility) The patient may owe the amount, such as deductible, coinsurance, or copay Transfer to patient balance or secondary insurance
OA (other adjustment) Used for situations that fit neither category, such as certain secondary payment cases Review the reason code and follow the payer’s explanation
PI (payer initiated reduction) Payer-initiated reduction where the patient is not billed Review the reason before writing off
CR (correction and reversal) Reverses or corrects a prior payment or adjustment Match to the original claim and re-post

CMS describes CO, PR, OA, and CR in its remittance guidance. The PI group code appears in the current X12 code set, and its use depends on the payer, so check the payer’s remittance guide.

CARC and RARC codes

The claim adjustment reason code (CARC) explains why a payment differs from the billed charge. The remittance advice remark code (RARC) adds supplemental detail. CMS notes that a CARC explains the adjustment and a RARC provides extra information, and that RARCs are required with certain CARCs. The X12 code committees maintain the current lists through the Washington Publishing Company, so always check the live list rather than a copied table.

Instead of memorizing individual codes, learn the families a biller sees every day:

  • Deductible, coinsurance, and copay amounts: expected patient responsibility, usually under PR
  • Contractual adjustment: the difference between billed charge and the allowed amount
  • Non-covered or not medically necessary: a denial that may need an appeal or a patient notice, depending on the contract and documentation
  • Authorization or referral missing: a front-end failure
  • Duplicate claim: a billing or tracking failure
  • Bundled or included in another service: a coding edit, often linked to modifiers
  • Timely filing: a deadline failure that rarely reverses without proof of timely submission
  • Coordination of benefits or other insurance: a payer needs primary payer information
  • Information requested or missing: a rework item

For how these denial families connect to causes and fixes, read why medical claims are denied. The difference between a payer rejecting a claim before adjudication and denying it after is explained in claim rejection vs denial.

The posting workflow, step by step

  1. Receive and match the deposit. Download the ERA and compare its total to the EFT deposit on the bank statement. Record the trace or check number.
  2. Batch the payments. Group by payer and deposit date so each batch ties to one bank amount.
  3. Auto-post what qualifies. Let the system post lines that match the claim and carry expected adjustments. Keep a rule list of what auto-posts, and review it often.
  4. Review exceptions manually. Look at denials, zero payments, reversals, negative balances, and partial payments.
  5. Apply payment at the line level. Enter the paid amount, the allowed amount, the contractual adjustment, and the patient responsibility for each procedure line.
  6. Compare to the expected allowed amount. Flag lines where the allowed amount differs from your contract or fee schedule.
  7. Transfer the balance. Send the remainder to secondary insurance, to the patient, or to a denial queue, depending on the codes.
  8. Record notes and reason codes. Log the CARC and RARC, the payer’s explanation, and the next action.
  9. Reconcile the batch. Confirm posted totals equal the deposit before closing the batch.
  10. Send exceptions to follow-up. Create tasks with owners and due dates for denials, underpayments, and information requests.

Contractual adjustments and allowed amounts

The charge on your claim is your fee. The allowed amount is what the payer contract recognizes for that service. The difference is the contractual adjustment, which the practice writes off. The payer then pays its share of the allowed amount, and the patient owes their share (deductible, coinsurance, or copay) where the plan assigns it.

Hypothetical example

Illustration only, with round numbers. A service is billed at 200. The contract allows 120. The contractual adjustment is 80. The patient’s plan applies a 20 percent coinsurance on the allowed amount after the deductible is met, so the patient owes 24 and the payer pays 96. Total received is 120, which equals the allowed amount. If the remittance showed a different allowed amount, a payment check against the contract would catch it.

Do not write off an adjustment just because it is under a CO group code. A CO code can describe a true contract reduction, or it can describe a denial that you may be able to fix. Read the reason before you decide.

Secondary billing and coordination of benefits

When the patient has more than one plan, posting decides what happens next. After the primary payer processes the claim, the biller must send the remaining balance to the secondary payer with the primary remittance details.

  • Crossover claims. Some payers, including Medicare in certain cases, forward claims to the secondary automatically. Verify that the crossover took place before you bill again.
  • Manual secondary submission. If there is no crossover, send the claim electronically with the primary payer’s paid amount and adjustment data.
  • Order of benefits. A claim billed to the wrong primary leads to denials. Verify who is primary when a patient has multiple plans, and update when coverage changes.
  • Patient responsibility after secondary. Bill the patient only after secondary processing is complete, and only for amounts the remittances assign to them.

Common secondary errors include sending a secondary claim without the primary ERA data, billing the patient before secondary finishes, and writing off balances the secondary could have paid.

Catching denials and rejections at posting

Posting is the best checkpoint for denials because the information is fresh. Build a rule that anything with a zero payment, a denial code, or a reduction beyond the expected contract amount goes to a work queue within the same day.

What the biller sees Likely meaning Next action
Zero paid with a denial CARC under CO Denied line; the practice cannot bill the patient unless the contract allows Check the reason; correct and resubmit, or appeal with documentation
Paid but allowed amount below the contract Possible underpayment Compare with the fee schedule, then file a payment dispute with evidence
Payment applied to the wrong patient or claim Posting error or payer misapplication Correct the posting and ask the payer to reprocess if it was theirs
Payment reversal (CR) with a later repayment Payer corrected a previous payment Match both entries; the net should equal the correct payment
Overpayment or recoupment notice Payer is taking money back Verify the basis, respond within the payer’s stated window, and keep records
Patient responsibility much higher than expected Eligibility or benefits data was wrong Re-verify benefits before billing the patient
Bundled service denial Coding edit applied Review modifiers and documentation; see modifiers in medical billing

Denials found at posting should flow into your denial management work queue with the reason code attached, so the resubmission or appeal starts with the right fix. If an old balance remains unresolved, A/R recovery handles the follow-up.

Underpayment detection

A payer can pay a claim at a rate below the contract without any denial code. If your system writes the shortfall off as a contractual adjustment, the underpayment disappears. Catch it with an expected reimbursement comparison.

  1. Load your contract fee schedules for the main payers into the billing system or a reference spreadsheet.
  2. Calculate the expected allowed amount for each CPT or HCPCS code, adjusting for modifiers and multiple procedure rules where the contract applies them.
  3. Compare the allowed amount on the remittance with the expected amount.
  4. Flag differences above a threshold you set, such as any variance on high-dollar lines.
  5. Sample the rest. Review a set of low-dollar lines every month for patterns.
  6. Dispute with evidence. Attach the contract rate, the remittance, and the claim, then follow the payer’s dispute process.

Not every difference is an underpayment. Multiple procedure reductions, contract carve-outs, sequestration or other adjustments the payer applies, and fee schedule updates can all change the allowed amount. Check the payer’s policies, and note that fee schedules change on a payer-defined schedule. If you do not have access to the contract rates, ask the payer for the fee schedule, and keep it current.

Posting patient payments and credits

  • Copays at check-in. Post them to the encounter that day so they apply when the payer’s patient responsibility comes back.
  • Prepayments and deposits. Hold them as unapplied credits until the claim is adjudicated, and then apply them to the correct balance.
  • Refunds. When a patient or payer overpays, follow your refund policy and the payer’s overpayment rules. Do not leave credit balances sitting in the system.
  • Payment plans. Post each installment to the account and keep the plan terms in the account notes.

Credit balances are a compliance and cash issue. Run a credit balance report each month and resolve each item, since unresolved credits can cause problems with payer and state refund rules. Confirm the specific rules that apply to your payers and state.

Controls: reconciliation and separation of duties

Payment posting handles cash, so it needs internal controls. Use the following checks:

  • Three-way match. Bank deposit, ERA total, and posted batch total should agree for each deposit.
  • Separation of duties. Where staffing allows, the person who posts payments should not be the only one who reconciles the bank, creates adjustments, or issues refunds.
  • Adjustment approval limits. Require a supervisor review for write-offs above a set amount, and for any non-contractual adjustment.
  • Unapplied cash report. Review payments sitting without a claim assignment every week.
  • Audit trail. Keep a log of who posted, edited, or reversed each payment.
  • Payer enrollment changes. Confirm EFT and ERA enrollment details after any bank or tax ID change, so payments do not go astray.

The practice owns its bank accounts and the final authority over write-offs. A billing partner can post, reconcile, and flag exceptions, and the practice decides on policy.

Common posting errors

Error Effect Prevention
Posting at claim level when line detail exists Denied lines hidden inside a paid claim Always post by service line
Writing off CO amounts without review Correctable denials lost Require review of CO denial codes
Applying payment to the wrong claim or date of service Misstated A/R and patient balances Match by patient control number and service line
Skipping secondary billing Balances sent to patients that insurance would pay Workflow that checks every PR amount for other coverage
Ignoring recoupments and reversals Cash shortage found at month-end Review CR codes and payer notices daily
Not reconciling to the bank Missing deposits, duplicate postings Reconcile each batch before closing it
Letting credit balances age Compliance risk and patient complaints Monthly credit review and refund policy

Metrics for posting quality

  • Posting lag: days between deposit date and posting date
  • Auto-post rate: share of lines posted without manual review, to be read alongside exception accuracy
  • Unapplied cash: dollars waiting for assignment, aged by days
  • Exception turnaround: days from posting to assignment of a denial or underpayment task
  • Underpayments identified and disputed: count and dollar amount, tracked by payer
  • Posting error rate: items corrected after audit
  • Reconciliation variance: difference between deposits and posted totals

For related measures, see clean claim rate and days in A/R. Mednex does not promise numeric targets, since they depend on payer mix and starting conditions.

Mednex and practice responsibilities

Task Mednex (when posting is in scope) Practice
ERA and EOB posting Posts by service line, reconciles batches to deposits Provides ERA enrollment access and bank deposit detail
Denial and underpayment flags Routes exceptions with reason codes and next steps Supplies contracts and fee schedules, answers record requests
Secondary and patient balances Transfers balances and bills secondary payers Sets patient billing and collection policy
Adjustment policy Follows approval limits Sets write-off authority and refund policy
Reporting Shares posting and exception reports Reviews reports and acts on process fixes
Payer payment decisions Cannot control or guarantee them Owns payer contracts

Next steps

Pick one payer and review one month of remittances. Count lines posted with a CO denial code, compare allowed amounts with your contract for the five most common codes, and check whether every deposit ties to a posted batch. That sample shows how much leaks through posting. More related guides are on the Mednex blog.

If you want an outside review, the Free Medical Billing Audit looks at denial reasons, A/R aging by payer, and charge capture gaps from the report exports you provide. No patient records should go through the website form.

To find out whether posting errors hide denials in your A/R, request the audit and bring a recent remittance report.

General information only

This guide is educational. It is not legal, coding, compliance or clinical advice. Rules differ by payer, plan, state and contract, so confirm against the payer's current policy before acting.

Frequently asked questions

What is payment posting in medical billing?

Payment posting is the process of recording each payer and patient payment against the correct claim and service line. The biller enters the paid amount, the allowed amount, the contractual adjustment, the patient's responsibility, and any denial or reduction codes. The system then updates the claim status and moves the remaining balance to a secondary payer, the patient, or a denial work queue. Accurate posting keeps A/R reliable and shows denials and underpayments the day the remittance arrives. Rules and timing differ by payer and contract, so confirm the details with the payer's current policy before you rely on them, and keep a written record of what you were told.

What is the difference between an ERA and an EOB?

An ERA is the electronic remittance advice, an X12 835 file sent to the practice that explains how the payer processed claims. An EOB, or explanation of benefits, is the paper or patient-facing version that explains the same processing. Payers usually send ERAs to providers and EOBs to patients, and some also send paper EOBs or remittance advice to providers. An ERA lets software auto-post matching lines and route exceptions to a person. You still need to compare the ERA total with the EFT bank deposit, since they arrive separately. If you are unsure how this applies to your practice, review a recent sample of your own claims and reports before you change a workflow.

What do CARC and RARC codes mean on a remittance?

A claim adjustment reason code (CARC) explains why a payment differs from the billed amount, and a remittance advice remark code (RARC) adds supplemental detail. The CARC works with a group code such as CO, PR, OA, PI, or CR, which tells you who is financially responsible. The code lists are maintained through X12 committees and updated regularly, so check the current list instead of a copied chart. In practice, learn the families: patient responsibility, contractual adjustment, non-covered, authorization, duplicate, bundled, timely filing, coordination of benefits, and missing information. Rules and timing differ by payer and contract, so confirm the details with the payer's current policy before you rely on them, and keep a written record of what you were told.

What is a contractual adjustment?

A contractual adjustment is the difference between what the practice billed and the allowed amount in the payer contract. The practice writes it off because it agreed to accept the allowed amount as payment in full, apart from patient cost sharing. For example, a service billed at 200 with a 120 allowed amount carries an 80 contractual adjustment. Do not assume every CO group code is a contractual adjustment. A CO code can also describe a denial that could be corrected or appealed, so read the reason code before you write anything off.

How do I find underpayments during posting?

Compare the allowed amount on each remittance line with the expected amount from your contract fee schedule. Load the fee schedules for your main payers, calculate expected amounts by code and modifier, and flag variances above a threshold you choose. Sample smaller lines each month to spot patterns. Before you dispute, rule out legitimate causes such as multiple procedure reductions, contract carve-outs, and fee schedule updates. If it is a true underpayment, submit a dispute with the contract rate, the remittance, and the claim, following the payer's process. Not every payer discloses rates easily, so request the fee schedule.

How should I post when the patient has secondary insurance?

Post the primary payment first, then send the remaining balance to the secondary payer with the primary remittance details. Check whether the primary payer crosses claims over automatically, as some do, and confirm it happened before you bill again. Verify the order of benefits when a patient has more than one plan, because the wrong primary causes denials. Bill the patient only after secondary processing is complete, and only for amounts the remittances assign to the patient. Common errors include skipping secondary billing and writing off balances the secondary could have paid.

What should I do about a payment reversal or recoupment?

Match the reversal to the original claim, post it, and find out why the payer took the money back. A reversal or correction code may be followed by a corrected payment, so check that the net equals the right amount. For a recoupment, verify the basis, respond within the payer's stated window, and keep records of the claim and your reply. Do not ignore the notice, because payers can offset the amount against future payments. If you disagree, follow the payer's dispute or appeal process and note deadlines. Rules and timing differ by payer and contract, so confirm the details with the payer's current policy before you rely on them, and keep a written record of what you were told.

How do I reconcile payments to my bank deposits?

Compare three numbers for every deposit: the bank deposit amount, the ERA or check total, and the total posted in your system. They should agree before you close the batch. Record the trace or check number so you can find the deposit later. When they differ, check for a different payment date, virtual credit card fees, a reversal or offset, a payment split across deposits, or a posting error. Run an unapplied cash report weekly and resolve anything without a claim assignment. If you are unsure how this applies to your practice, review a recent sample of your own claims and reports before you change a workflow.

Can payment posting be outsourced?

Yes, many practices outsource posting as part of billing or RCM. The vendor typically downloads ERAs, posts by service line, reconciles batches, flags denials and underpayments, and reports exceptions. The practice should keep ownership of its bank accounts, contracts, write-off policy, and refund decisions. Ask who has access to ERA enrollment and bank detail, how data is protected, and whether a business associate agreement applies. Mednex describes its data workflow as a signed BAA with secure exchange, subject to confirmation for each engagement. Rules and timing differ by payer and contract, so confirm the details with the payer's current policy before you rely on them, and keep a written record of what you were told.

How do I know if my posting process is working?

Track posting lag, the auto-post rate alongside exception accuracy, unapplied cash, exception turnaround, underpayments found and disputed, posting error rate, and reconciliation variance. A rising auto-post rate with a rising error rate means rules are too loose. Also review a sample of CO write-offs each month to confirm they were true contractual adjustments. If you want a second look, the Free Medical Billing Audit reviews denial reasons, A/R aging by payer, and charge capture gaps from report exports, without patient records going through the website form. If you are unsure how this applies to your practice, review a recent sample of your own claims and reports before you change a workflow.

Sources

Want this reviewed against your own claims?

The free medical billing audit looks at a sample of your recent claims, denial reasons and A/R aging. You get a written summary and a walkthrough call.

Do not include patient names, insurance IDs or clinical details. If records are needed later, we set up a secure way to share them.