Free Medical Billing Audit

Guide

The Medical Billing Process, Step by Step

The medical billing process is the sequence of steps that turns a patient visit into payment: registering the patient, verifying coverage, documenting and coding the service, building and submitting a claim, posting what the payer pays, working denials and unpaid balances, and billing the patient for what remains. Each step feeds the next, so a small error early on (a wrong member ID, a missing authorization) usually shows up weeks later as a denial or an aging balance.

Laptop and stethoscope on a desk in a medical workspace
In this article
  1. What medical billing is, and what it is not
  2. The medical billing process at a glance
  3. Steps 1 to 3: scheduling, eligibility and authorization before the visit
  4. Scheduling and registration data
  5. Eligibility and benefits verification
  6. Prior authorization and referrals
  7. Step 4: check-in and collecting at the time of service
  8. Steps 5 and 6: documentation and coding
  9. The code sets a medical claim uses
  10. What a coding review checks
  11. Step 7: charge entry and claim creation
  12. Step 8: claim scrubbing, clearinghouse and submission
  13. Step 9: how the payer adjudicates a claim
  14. Step 10: payment posting and remittance reconciliation
  15. Step 11: denials, appeals and A/R follow-up
  16. The denial queue
  17. The unpaid claim queue
  18. Step 12: patient statements and collections
  19. Worked example: one claim from schedule to zero balance
  20. How to measure whether the process is working
  21. Where the process breaks, and the fix
  22. Who does what: your practice and Mednex
  23. Where to start if you suspect a leak
Key takeaways

Most billing problems start before the claim exists, at scheduling, registration and eligibility. A claim passes through several checkpoints (clearinghouse edits, payer acceptance, adjudication, remittance), and each one can stop it for a different reason. Payment posting and denial analysis are what tell you where the process is leaking. Every payer sets its own rules, so use the steps below as a framework and confirm details in each payer’s manual.

What medical billing is, and what it is not

Medical billing is the administrative and financial work of getting a healthcare practice paid for services it has already delivered. The biller does not decide what care a patient needs and does not judge clinical quality. The job is to translate documented care into the standard languages payers accept: procedure codes (CPT and HCPCS Level II), diagnosis codes (ICD-10-CM), modifiers, units, place of service, and the provider and patient identifiers that tie a claim to a contract.

That translation work sits inside a larger system. If you want the broader view that includes contracting, credentialing and analytics, read medical billing vs revenue cycle management. This article stays on the claim itself: the path one visit takes from the schedule to a zero balance.

It also helps to separate the three money flows. The payer pays the allowed amount under the contract, the patient pays copays, deductibles and coinsurance, and the practice writes off the contractual difference between the billed charge and the allowed amount. A clean process makes sure each of those three amounts is calculated, collected or adjusted correctly, and that none is left to drift in accounts receivable.

The medical billing process at a glance

The table below shows the full cycle, who normally owns each step, and the failure that step is meant to prevent. Ownership varies by practice size, but the sequence does not.

Step What happens Typical owner Failure it prevents
1. Scheduling and pre-registration Capture demographics, insurance, referral and visit type Front desk Wrong payer, missing referral
2. Eligibility and benefits verification Confirm active coverage, copay, deductible, plan rules Front desk or billing Eligibility denials, patient surprise bills
3. Prior authorization Obtain approval for services that require it Authorization staff Authorization denials
4. Check-in and collection at time of service Verify identity and card, collect copay Front desk Uncollected patient balances
5. Clinical documentation Provider records the visit and signs the note Provider Unsupported or uncodable services
6. Coding Assign CPT/HCPCS, ICD-10-CM, modifiers, units Coder or provider Coding denials, audit exposure
7. Charge entry and claim creation Post charges, build the claim Billing Missed charges, wrong rendering provider
8. Claim scrubbing and submission Run edits, send the claim electronically Billing and clearinghouse Rejections
9. Adjudication Payer applies edits, benefits and contract pricing Payer Not applicable (payer step)
10. Payment posting Post payments, adjustments and patient responsibility Billing Hidden underpayments, bad data
11. Denial and A/R follow-up Correct, appeal or chase unpaid claims Billing Write-offs from missed deadlines
12. Patient billing Statements, payment plans, collections policy Billing or front office Aging patient balances

Steps 1 to 3: scheduling, eligibility and authorization before the visit

Billing quality is decided in the first few minutes of contact with the patient. The front desk collects the data the claim will later depend on, and any gap here is far cheaper to fix now than after the claim is denied.

Scheduling and registration data

At scheduling, capture the patient’s legal name exactly as it appears on the insurance card, date of birth, address, phone, the primary and any secondary insurance, the subscriber’s name and date of birth when the patient is a dependent, and the member ID and group number. For specialists, record the referring provider and whether a referral is required. For visits that may involve an accident or work injury, record that early, because liability and workers’ compensation rules change who the primary payer is.

Eligibility and benefits verification

Eligibility verification confirms that coverage is active on the date of service and shows what the plan will pay. Most practices check electronically through the clearinghouse or a payer portal, using the standard eligibility inquiry and response transactions, and fall back to a phone call when the response is incomplete. A useful verification captures more than “active”:

  • Coverage dates and plan name, including whether it is a managed care plan or a traditional plan
  • Copay by service type (office visit, specialist, urgent care, telehealth)
  • Deductible amount, amount met, and out-of-pocket maximum status
  • Coinsurance percentage for the service
  • Whether the practice and the rendering provider are in network for this plan
  • Whether the service requires referral or prior authorization
  • Visit limits for therapy, behavioral health or chiropractic services
  • Other coverage on file, which affects coordination of benefits

Save the verification result in the patient record with the date, the method and the staff member who did it. When a payer later disputes eligibility, that record is your evidence.

Prior authorization and referrals

Some services need payer approval before they are performed. Which ones depends on the payer, the plan and the year, so there is no universal list. Imaging, advanced diagnostics, surgeries, durable equipment, some injectable drugs and certain therapy visits are common examples. The workflow that protects revenue is simple: check the payer’s requirement at scheduling, submit the request with clinical support, record the authorization number, approved codes, units and date span, and make that information visible to whoever builds the claim. Our guide to what prior authorization is covers the request itself, and the prior authorization services page explains how the work can be outsourced.

Check before you schedule

If the visit type, the CPT code expected, or the plan has changed since the last visit, run eligibility again. Coverage that was active last quarter may have ended, and a returning patient is the most common source of avoidable eligibility denials.

If you want to see which step in your own process loses the most time or money, a free medical billing audit reviews a sample of claims and denial reasons.

Step 4: check-in and collecting at the time of service

At check-in, confirm the patient’s identity, copy the current insurance card (front and back), and ask whether coverage or address has changed. Then collect what the plan says the patient owes. Copays are the most reliable, because the amount is fixed and known. Deductible and coinsurance amounts are estimates until the claim is processed, but many practices collect an estimate based on the verified benefits and reconcile afterward.

Collecting at the time of service matters for a plain reason: the cost to collect rises sharply once a balance becomes a statement. A practice that skips this step is effectively lending money to patients and then paying staff to chase it. Write down your policy for no-shows, cancelled visits, self-pay patients and patients who cannot pay at the visit, and apply it consistently. For patients without insurance or who choose not to use it, the federal No Surprises Act requires good faith cost estimates in certain situations, so ask your compliance advisor how that applies to your services.

Steps 5 and 6: documentation and coding

The claim can only describe what the note supports. After the visit, the provider documents the history, findings, assessment, plan, time where time matters, and the procedures performed. The note must be completed and signed within the timeframe set by your policies and by the payers you bill. Unsigned or late notes are a quiet cause of delayed claims.

The code sets a medical claim uses

  • CPT (Current Procedural Terminology, maintained by the AMA) describes physician services such as evaluation and management visits and procedures.
  • HCPCS Level II covers supplies, drugs, equipment and services not in CPT. See our explainer on J-codes in medical billing for the drug side.
  • ICD-10-CM diagnosis codes explain why the service was needed. Each procedure line points to one or more diagnoses.
  • Modifiers clarify circumstances, such as a separately identifiable service on the same day or a bilateral procedure. The guide to medical billing modifiers explains the common ones.
  • Place of service codes tell the payer where the service happened, which affects pricing. See place of service codes.

What a coding review checks

Before a claim leaves, the coder (or a second reviewer) should ask whether the level of service matches the documentation, whether each diagnosis supports medical necessity for the procedure it is linked to, whether any services are bundled under payer edit rules, whether modifiers are used for a documented reason, and whether time-based or unit-based codes have the minutes or units recorded. Coding is not a place to guess. When the documentation is unclear, the right action is a provider query, not a best-case code. Aggressive coding that is not supported creates repayment and audit risk that outlasts any one claim.

Step 7: charge entry and claim creation

Charge entry moves the coded encounter into the practice management system as billable lines with a date of service, rendering and billing provider, facility, units and fee. Most practice systems then assemble a claim. Professional claims are submitted electronically in the ASC X12 837P format, which carries the same data as the paper CMS-1500 form. Institutional claims use the 837I and the UB-04 data set.

Charge capture gaps are a quiet revenue problem. A visit that happened but never produced a charge cannot be denied, so it never appears in a denial report. Reconcile the daily schedule against posted charges every day: each completed appointment should map to a charge, a documented no-charge reason, or an open note. Our piece on revenue leakage in healthcare lists the common places charges disappear.

Fields that cause the most downstream trouble on a claim include:

  • Billing provider NPI and tax ID that do not match the payer’s enrollment record
  • Rendering provider who is not credentialed with that payer yet (see what is medical credentialing)
  • Service facility address that differs from the enrolled location
  • Referring or ordering provider missing when the payer requires it
  • Authorization number absent or entered in the wrong field
  • Primary and secondary payer order entered backwards

Step 8: claim scrubbing, clearinghouse and submission

A claim scrubber applies automated edits against payer rules and general coding logic before the claim goes out. Many practice systems include one, and clearinghouses add their own layer. The goal is to catch fixable errors while they are still cheap: missing fields, invalid code combinations, diagnosis pointers that do not fit, mismatched genders and procedures, and payer-specific requirements.

After scrubbing, the claim goes to a clearinghouse, which validates the file format, routes the claim to the right payer, and returns acknowledgments. The standard sequence is:

  1. Batch acknowledgment (999). The clearinghouse confirms the file was received and is structurally valid.
  2. Claim acknowledgment (277CA). The payer or clearinghouse reports each claim as accepted or rejected, with a reason.
  3. Remittance (835). After adjudication, the payer sends the electronic remittance advice that explains payment and adjustments.

A rejected claim never entered adjudication. It needs correction and resubmission, and there is typically no appeal because there was no decision. The difference matters for deadlines and workflow, and it is covered in claim rejection vs denial. Work the rejection report every day. A claim sitting in a rejection queue is a claim the payer has never seen, and its timely filing clock keeps running.

Timely filing limits differ by payer and contract, and they can be short. Do not assume one number applies everywhere. Record each payer’s limit in your system and measure submission lag against it.

Step 9: how the payer adjudicates a claim

Adjudication is the payer’s decision process. In general, the payer checks that the member was covered on the date of service, that the provider is enrolled and contracted, that the claim is complete, that the services are covered and medically necessary under the plan, that required authorizations exist, and that the claim is not a duplicate. It then prices the lines under the contract, applies the member’s deductible, copay and coinsurance, and issues payment, a partial payment, or a denial.

The result is one of four outcomes: paid as billed, paid at a reduced amount with adjustments, denied in part, or denied in full. Each adjustment carries a claim adjustment reason code and a group code on the remittance. Learning to read those is the core skill of follow-up work, and why medical claims are denied walks through them.

Step 10: payment posting and remittance reconciliation

Payment posting records the money and the explanation. Posting should capture, for each line, the amount paid, the contractual adjustment, the patient responsibility by type (copay, deductible, coinsurance, non-covered), and any denial or reduction with its codes. Electronic remittance advice can auto-post much of this, but posters still need to review exceptions.

Three checks keep posting honest:

  • Deposit reconciliation. The posted total for each remittance should equal the bank deposit or the electronic funds transfer amount.
  • Contract comparison. Compare the allowed amount on each line with the expected contract rate. A pattern of paying below contract is an underpayment, not a write-off.
  • Adjustment review. Write-offs should carry a reason code, and only contractual differences should be written off automatically. Anything else needs a person to decide.

The mechanics of this step are covered in more depth in payment posting in medical billing. If posting is sloppy, every report built on top of it is wrong, including the denial rate and the days in A/R.

Step 11: denials, appeals and A/R follow-up

Not every claim pays on the first pass, so follow-up is a standing workflow, not an occasional cleanup. Two queues matter.

The denial queue

Each denial should be classified by cause (eligibility, authorization, coding, medical necessity, duplicate, coordination of benefits, enrollment, timely filing, other), assigned an action (corrected claim, appeal, patient billing, write-off with approval) and given a deadline. Appeal windows are set by the payer and contract, so track the date per claim. Fix the cause at its source as well: if one front-desk habit produces a recurring denial, retraining there is worth more than any number of appeals. The denial management services page describes how this queue can be run for you.

The unpaid claim queue

Claims with no response also need working. A standard cadence is to check claim status at a set interval after submission, escalate claims that exceed the payer’s usual turnaround, and prioritize by balance and by how close the claim is to a filing or appeal limit. The accounts receivable recovery page and our guide on how to reduce A/R over 90 days go further into aging buckets and escalation.

Step 12: patient statements and collections

Once the payer has finished, the remaining balance belongs to the patient only if the remittance says so and the contract allows billing it. Contractual write-offs, denials caused by the provider’s own error, and amounts the payer assigned to the provider are not patient responsibility in many contracts, so confirm the group code and your agreement before a statement goes out. Sending a patient a bill for an amount they do not owe is a compliance risk and a reputation cost.

A workable patient billing cycle includes a clear statement showing the date of service, the charge, the insurance payment, the adjustment and the balance due; multiple payment options; a reminder schedule; a payment plan policy; and a defined point at which an account is reviewed for outside collections or hardship handling. Keep wording factual and avoid threatening language. Statement content and collection practices are regulated differently by state, so have your policy reviewed locally.

Worked example: one claim from schedule to zero balance

Hypothetical example

All numbers below are round illustrations, not real patient, payer or practice data.

A patient with a commercial PPO books a follow-up visit with a physician in a small internal medicine practice.

  1. Scheduling. The front desk confirms the card on file. Verification shows active coverage, a $30 specialist copay, and a $1,000 deductible with $400 met.
  2. Visit. The patient pays the $30 copay at check-in. The provider documents an established patient office visit and a point-of-care test.
  3. Coding. The coder assigns an established patient E/M code at a level supported by the documentation, one test code, and two ICD-10-CM diagnoses linked to each line.
  4. Charge entry. Charges post the same day: $150 for the visit, $50 for the test, total billed $200.
  5. Scrubbing. The scrubber flags a missing referring-provider field the payer requires for this plan. Billing corrects it and releases the claim.
  6. Submission. The clearinghouse returns an accepted 999 and a 277CA showing the claim accepted.
  7. Adjudication. The payer allows $120 in total ($200 billed minus an $80 contractual adjustment). Because $600 of deductible remains, the payer applies $90 to deductible after the $30 copay, and pays $0 on this claim.
  8. Posting. The 835 posts: allowed $120, contractual adjustment $80, copay $30 already collected, deductible $90 patient responsibility, insurance paid $0.
  9. Patient billing. A statement for $90 goes out. The patient pays on the second reminder.
  10. Close. The account balance reaches zero and the encounter is marked closed.

Notice what would have gone wrong with weaker habits. Without eligibility, the deductible would have been a surprise. Without the scrubber, the claim would have rejected and sat unseen. Without careful posting, the $0 insurance payment might have been read as a denial and chased for no reason. Each step protected the next.

How to measure whether the process is working

You cannot improve what you do not track. These measures are standard in revenue cycle work, and each points to a specific step.

Measure What it shows Where to look when it worsens
Days from date of service to charge entry Documentation and coding speed Provider note completion, coding queue
Days from charge entry to submission Billing and scrubbing speed Rejection queue, missing data
Clean claim rate Share of claims accepted and paid without rework Registration, coding, scrubber rules
Rejection rate Claims stopped before adjudication Demographic and payer ID errors
Denial rate by reason Claims refused after adjudication Eligibility, authorization, coding
Days in A/R Average time to collect Follow-up cadence, payer behavior
A/R aging by bucket and payer Where money is stuck Specific payers, old balances
Net collection rate Collected versus collectible after contract adjustments Underpayments, write-offs
Patient collection at time of service Front-end discipline Check-in workflow

Define each measure in writing before you start comparing months, because two people can calculate “days in A/R” differently. Our article on clean claim rate and days in A/R gives formulas and cautions. Benchmarks vary by specialty, payer mix and size, so compare your numbers to your own trend first, and avoid chasing a figure from a generic list.

Where the process breaks, and the fix

Symptom Likely cause Corrective action
Many eligibility denials Coverage not verified on date of service, or card not refreshed Verify every visit within a set window before the appointment; refresh card at check-in
Rejections pile up Nobody owns the daily rejection report Assign an owner and a same-day target for corrections
High volume of coding denials for one provider Documentation habits or modifier use Targeted coding review and provider education
Payments post but A/R never falls Contractual adjustments written off without checking rates Compare allowed amounts to the fee schedule
Patient balances grow Copays and estimates not collected at the visit Check-in script, point-of-sale terminal, estimate tool
Newly hired provider has claims stuck Enrollment not effective with payer Track effective dates and hold claims per payer policy
Same payer slow every month Missing follow-up trigger Set a status check date per payer turnaround

One of the most expensive failures is billing under a provider who is not yet enrolled with the payer. If a physician starts seeing patients before enrollment is effective, claims can be denied and, depending on the payer, may not be payable retroactively. The details are in our guide on how long credentialing takes.

Who does what: your practice and Mednex

Some practices run the whole cycle in house, some outsource all of it, and many split it. The division below describes a typical engagement, and the exact scope is agreed in writing for each practice. Compare it with the trade-offs in outsourcing medical billing vs doing it in house.

Area The practice usually handles Mednex can handle
Scheduling and check-in Patient contact, card capture, copay collection Eligibility and benefits verification, authorization requests
Clinical documentation Notes, signatures, answers to provider queries Coding review and documentation queries
Claims Final approval of any policy questions Charge entry, scrubbing, submission, rejection work
Payments Bank access and deposit routing Payment posting, underpayment flags
Denials and A/R Decisions on write-offs above your set limit Denial analysis, corrected claims, appeals, follow-up
Patients Local relationships and hardship decisions Statement preparation and billing questions, as agreed
Reporting Reviewing results and acting on trends Standard revenue cycle reports on an agreed schedule

Mednex cannot guarantee that any claim will be paid, because coverage and payment decisions belong to the payer. What a billing partner can control is how accurately and quickly claims are prepared, how consistently follow-up happens, and how clearly results are reported. The full service description is on the medical billing services page.

Where to start if you suspect a leak

You do not need to rebuild the process to learn where it is weak. Pull four reports from your practice management system: A/R aging by payer, the denial or remittance report for the last quarter, a list of rejected claims, and the charges posted against the appointment schedule for a sample week. Compare them against the steps above. If denials cluster at eligibility, start at the front desk. If A/R is old but denials are few, the problem is follow-up. If charges are missing, look at documentation and charge capture.

If you would like a second set of eyes on those exports, the free medical billing audit reviews a sample of claims, denial reasons, A/R aging and charge capture and returns a written summary with a walkthrough call. You supply report exports, patient records do not go through the website form, and any PHI is handled only through a secure workflow under a signed agreement. You can also contact the team with questions first, and browse other practical guides in the Mednex blog.

General information only

This guide is educational. It is not legal, coding, compliance or clinical advice. Rules differ by payer, plan, state and contract, so confirm against the payer's current policy before acting.

Frequently asked questions

What are the main steps in the medical billing process?

The main steps are scheduling and registration, eligibility and benefits verification, prior authorization when required, check-in and copay collection, documentation, coding, charge entry, claim scrubbing and submission, payer adjudication, payment posting, denial and A/R follow-up, and patient billing. The first three steps prevent most downstream denials, while posting and follow-up reveal where the process is leaking money. In practice, each step has a handoff: the front desk passes verified insurance to the clinician's schedule, clinicians pass documented notes to coding, coding passes charges to billing, and billing passes remittances to follow-up. Delays often occur at handoffs, so give each one an owner and a target time.

What is medical billing in simple terms?

Medical billing is the work of turning a documented patient visit into a claim that a payer can process, then tracking that claim until the practice and the patient have paid what is owed. It uses standard code sets such as CPT, HCPCS and ICD-10-CM, plus provider and payer identifiers. Billers do not make clinical decisions; they translate documented care into payable claims. A concrete example: a patient is scheduled, the staff verify coverage, the visit is documented, a coder assigns codes, the biller submits a claim, the payer processes it and sends an explanation of benefits and an electronic remittance, and the practice posts the payment and bills any patient balance.

How long does the medical billing process take from visit to payment?

There is no single number, because it depends on how fast notes are completed, how quickly claims go out, and each payer's processing time. Electronic claims to many payers are processed faster than paper, but denials, rejections and patient balances extend the cycle. Track your own days from service to submission and days in A/R by payer to see where time is lost. Measure your own timeline in stages: visit to note completion, note to charge, charge to claim, claim to first payment, and payment to patient balance closed. The slowest stage is where to focus, and the answer will differ by payer. Avoid relying on an industry average that may not match your mix.

What is the difference between medical billing and medical coding?

Coding converts documentation into standardized codes for procedures, diagnoses and modifiers. Billing takes those codes, adds patient, provider and payer data, creates the claim, submits it, and manages payment and follow-up. In small practices one person may do both. Errors in coding show up as billing denials, so the two functions need regular feedback between them. Coders usually work from clinical documentation and need queries answered by clinicians. Billers handle claim creation, submission, rejections, posting and follow-up. Where the two roles are split, define how a coding correction after a denial gets back to the coder, so the same mistake is not repeated on later claims.

What is a clearinghouse and do I need one?

A clearinghouse is an intermediary that checks claim format, applies edits, routes claims to the correct payer, and returns acknowledgments and remittances. Most practices that bill electronically use one, either directly or through their practice management system. It reduces avoidable rejections and gives you one place to see which claims were accepted, rejected, or are still pending. Check whether your practice management system or EHR connects to one already, and who owns the account. Ask who receives rejection reports and how fast they are worked. Clearinghouse fees and enrollment requirements differ, so confirm current terms with the vendor rather than assuming.

What happens when a claim is rejected versus denied?

A rejected claim failed format or data edits and was never processed, so you correct the error and resubmit. A denied claim was processed and refused payment in whole or part, so you decide whether to submit a corrected claim, appeal, bill the patient where allowed, or accept the result. Work rejections daily because the filing clock keeps running. Rejections come back quickly, often within a day or so of submission, and usually mean a data issue such as an invalid ID or a missing field. Denials appear on the remittance with reason and remark codes. Handle each in its own queue, with its own deadline and owner.

Which steps cause the most denials?

Front-end steps cause a large share: wrong or outdated insurance data, unverified eligibility, missing referrals or authorizations, and demographic mismatches. Coding and modifier errors, missing provider enrollment, and incomplete documentation follow. Your own denial report by reason code shows which apply to your payers, and that report should drive where you spend training and automation effort. A simple way to find out is to categorize every denial for a month by reason code and by the step that created it, then count. Most practices find two or three repeating causes. Fix those at the source, such as registration scripts or authorization checks, instead of working each denial again.

Can a small practice run the billing process in house?

Yes, many do. It works when someone owns each step, eligibility is checked before every visit, rejections are worked daily, payments are posted with contract comparison, and aging is reviewed on a schedule. It struggles when billing is one person's side task or when staff turnover leaves gaps. The usual trade-offs are covered in the in-house versus outsourced billing comparison. Set minimum controls even in a small office: a daily rejection check, a weekly aging review, a monthly denial review and a payment posting reconciliation. Cross-train a second person so billing continues during absences. If the work consistently falls behind, that is the signal to compare options, including outside help.

What reports should I review to know if billing is healthy?

Review A/R aging by payer, denials by reason code, rejection counts, days from service to submission, clean claim rate, net collection rate, and charges compared with the appointment schedule. Define each measure in writing so months are comparable. Compare against your own trend first, since benchmarks vary by specialty, payer mix and practice size. Choose a small set of measures and define them in writing: days from service to submission, clean claim rate, denial rate by reason, days in A/R, and net collection. Review the same measures on the same schedule each month. Mednex's reporting cadence is confirmed during scoping rather than fixed here.

Can Mednex guarantee my claims will be paid?

No. Coverage and payment decisions belong to the payer, and no billing partner can guarantee reimbursement. What Mednex can do is prepare claims carefully, check eligibility and authorization where that is in scope, work rejections and denials, follow up on unpaid claims, and report results on an agreed schedule. The free billing audit shows where your current process is leaking. What Mednex does is process and follow-through: claim preparation, eligibility and authorization checks where in scope, rejection and denial work, payer follow-up and reporting. The practice remains responsible for accurate documentation, patient information and decisions about care. A free audit is the easiest way to see where claims are slowing down.

Sources

Want this reviewed against your own claims?

The free medical billing audit looks at a sample of your recent claims, denial reasons and A/R aging. You get a written summary and a walkthrough call.

Do not include patient names, insurance IDs or clinical details. If records are needed later, we set up a secure way to share them.