Free Medical Billing Audit

Guide

Place of Service Codes in Medical Billing: POS 11, 22, 19, 02 and 10

Place of service codes are two-digit codes on a professional claim that tell the payer where the patient was physically located when the service was delivered. They matter because the payer uses them to pick the payment rate, to check that the procedure code makes sense for that setting, and to decide whether a facility is also billing. A wrong code can cut payment, trigger a denial, or create an overpayment you owe back. This guide explains the codes most practices use, how POS 11, 22, 19, 02 and 10 differ, and how to find and fix the errors that cost money.

Laptop and stethoscope on a desk in a medical workspace
In this article
  1. What place of service codes are and where they appear on a claim
  2. Why the place of service changes how much you are paid
  3. Hypothetical example: the same procedure in two settings
  4. Common place of service codes and when to use them
  5. POS 11 vs POS 22 vs POS 19: the office and hospital outpatient problem
  6. How to find the right code for a location
  7. Telehealth place of service: POS 02 vs POS 10 and the modifier question
  8. Telehealth claim checklist
  9. How the place of service must match the procedure code
  10. Place of service examples by specialty
  11. What goes wrong: common POS errors, causes and fixes
  12. How to audit your place of service coding step by step
  13. Prevention: build the right code into the workflow
  14. How to measure whether POS errors are under control
  15. What Mednex handles and what the practice handles
  16. Next steps if you suspect place of service errors
Key takeaways
  • The POS code describes where the patient was, not where the doctor was and not where the practice is based.
  • Medicare and many commercial payers price the same CPT or HCPCS code differently in a facility setting and a non-facility setting, so the POS drives the rate.
  • POS 11 (office), 19 (off campus outpatient hospital), 22 (on campus outpatient hospital), 02 and 10 (telehealth) are the codes that most often get mixed up.
  • The POS must agree with the procedure code, the rendering location on file with the payer, and what the facility bills. Check all three before submission.
  • Payers differ on telehealth POS and modifier rules. Confirm each payer’s current policy rather than assuming one rule applies everywhere.

What place of service codes are and where they appear on a claim

The Centers for Medicare & Medicaid Services maintains the place of service code set, and nearly every payer in the country uses it for professional claims. A POS code is a two-digit number. It appears in item 24B of the paper CMS-1500 form and, on the electronic 837P claim, in the service line and the claim-level facility code field. A single claim can carry different POS codes on different lines, although most claims carry one.

The code answers a plain question: where was the patient when the billed service was furnished? A cardiologist who reads an echocardiogram from home still bills the service where the patient was tested. A physician who sees a patient in an exam room of a hospital-owned clinic bills the location type of that clinic, not the physician’s own office. This is the first idea that trips people up, so it is worth stating again: the code follows the patient and the licensed location, not the clinician.

POS is separate from the type of service, the revenue code a facility uses, and the bill type on a hospital claim. A hospital bills its own charges on a UB-04 (837I), and a physician group bills professional charges on a CMS-1500 (837P). Both claims for one visit can exist at the same time, and the payer matches them. That matching is why a wrong POS on the professional claim can cause a denial even when the procedure code is perfect.

Why the place of service changes how much you are paid

Under the Medicare Physician Fee Schedule, most codes have two payment amounts: a non-facility amount and a facility amount. The difference comes from practice expense. In a non-facility setting such as a physician office, the practice pays for the room, equipment, supplies and clinical staff, so the fee schedule includes those costs. In a facility setting such as a hospital outpatient department or an ambulatory surgical center, the facility bears those costs and bills for them separately, so the professional payment is lower.

That is the mechanism behind most POS-related payment changes. The same procedure can pay noticeably more in POS 11 than in POS 22, because POS 11 is a non-facility setting and POS 22 is a facility setting. The CMS fee schedule lookup tool shows both amounts for any code, and many commercial payers copy the structure with their own fee schedules.

Hypothetical example: the same procedure in two settings

Hypothetical example, using round numbers for illustration only. A practice performs a minor in-office procedure. The fee schedule allows $100 in the non-facility setting and $70 in the facility setting.

Scenario POS billed Allowed amount What happens
Patient seen in the practice’s own leased office, no hospital affiliation 11 $100 Correct. The practice carries the room and supply costs.
Same procedure, but the clinic is a hospital-based department 19 or 22 $70 Correct. The hospital also bills a facility fee for the room and supplies.
Hospital-based clinic, but the claim was billed with POS 11 11 $100 paid, $70 owed Overpayment of $30 per claim. Payer review or a hospital claim match can trigger a refund request.
Practice office, but the claim was billed with POS 22 22 $70 Underpayment of $30 per claim that often goes unnoticed because the claim “paid.”

Run the arithmetic across a year. If a hypothetical practice bills 40 of those procedures a month with the wrong code, the error is $1,200 a month, $14,400 a year, in either direction. One direction is lost revenue. The other is a refund liability with a lookback. Neither shows up as a denial, which is why POS errors survive for so long.

Common place of service codes and when to use them

The full CMS code set is long. Most practices bill from a short list. The table below uses CMS’s published names; confirm the current list on the CMS place of service page before building a charge master or EHR crosswalk.

POS CMS name Typical use in a practice
02 Telehealth provided other than in patient’s home Patient is at a clinic, hospital or other site, not at home, and is seen by video or other telehealth technology.
10 Telehealth provided in patient’s home Patient is at a private residence for the telehealth visit.
11 Office Visits in a physician or practitioner office that is not provider-based to a hospital.
12 Home In-person visit at the patient’s private residence.
13 Assisted living facility Visits to patients living in assisted living.
19 Off campus outpatient hospital Hospital outpatient department located away from the main campus.
20 Urgent care facility Walk-in urgent care that meets the code definition.
21 Inpatient hospital Professional services to admitted patients.
22 On campus outpatient hospital Hospital outpatient department on the main campus.
23 Emergency room, hospital Services in the hospital emergency department.
24 Ambulatory surgical center Procedures performed in a freestanding ASC.
31 Skilled nursing facility Visits to patients in a skilled nursing facility.
32 Nursing facility Visits to long-term care residents.
49 Independent clinic Outpatient-only clinic that is not part of a hospital and does not fit another code.
50 Federally qualified health center FQHC services, billed under FQHC rules rather than the physician fee schedule.
72 Rural health clinic Certified rural health clinic services, billed under RHC rules.

Two code families sit outside the physician fee schedule logic. FQHC (50) and RHC (72) claims are paid under their own payment methods, so the POS helps route the claim to the right pricing rather than choosing between two fee schedule amounts. If your practice is an FQHC or RHC, ask your payer or Medicare Administrative Contractor how your claims should be built, because the form, the code set and the payment method differ from a standard office claim.

If you suspect your location settings are off, a free medical billing audit is a low-effort way to have a sample of claims checked for place of service and payment patterns.

POS 11 vs POS 22 vs POS 19: the office and hospital outpatient problem

This is the comparison that causes the most money to move. All three describe outpatient care, but the code depends on who owns and licenses the location.

  • POS 11 (Office). A physician or practitioner office that is not a department of a hospital. The practice pays the overhead and gets the higher, non-facility professional payment. No hospital facility fee exists for the visit.
  • POS 22 (On campus outpatient hospital). An outpatient department on the hospital’s main campus. The hospital bills a facility fee. The professional claim is paid at the facility rate.
  • POS 19 (Off campus outpatient hospital). A department that the hospital operates away from the main campus and that is provider-based. The professional claim is also paid at the facility rate, and the hospital also bills a facility fee.

The decision rule is not geography and not the sign on the door. It is whether the location is provider-based to a hospital under the payer’s rules. A clinic that carries a hospital name but is a separately owned physician practice is a POS 11 location. A clinic that looks like an ordinary medical office but has been acquired by a health system and registered as a hospital outpatient department is a POS 19 or 22 location.

How to find the right code for a location

  1. Ask who bills the facility fee. If a hospital submits a facility claim for the same visit, the location is hospital outpatient, and the professional POS is 19 or 22.
  2. Check the Medicare enrollment record. Your enrollment in PECOS and your payer contracts list each practice location and how it is classified.
  3. Check the lease and licensing. A practice that leases space inside a hospital building may still be a POS 11 office if it is not provider-based.
  4. Check the hospital’s provider-based attestation if you are employed or contracted. Your compliance contact or the hospital revenue cycle team can tell you whether the department is provider-based and whether it is on or off campus.
  5. Write the answer into your location setup in the practice management system, so staff never choose the POS manually per visit.

When a practice is acquired by a hospital or joins a health system, the POS often changes on the day of the transaction while the front desk, the exam rooms and the staff stay the same. Many billing offices miss that date, and months of claims go out with the old code. Add a POS review to every acquisition, affiliation and relocation checklist.

Telehealth place of service: POS 02 vs POS 10 and the modifier question

Telehealth added two POS codes that billing teams must keep apart. POS 10 applies when the patient is at home. POS 02 applies when the patient is somewhere else, such as a clinic or a facility, and is receiving care by telehealth. CMS pays POS 10 at the non-facility rate under the Medicare fee schedule, and POS 02 at the facility rate. That split was set in rulemaking for recent fee schedule years, and the rates and the underlying Medicare telehealth flexibilities have been subject to extensions and changes by Congress. Check the current CMS telehealth page and your Medicare Administrative Contractor’s guidance before you rely on any date.

Modifiers are the second half of the telehealth question. Modifier 95 identifies synchronous audio and video services for many payers, and other payers use modifier 93 for audio-only services or ask for their own modifiers. Some payers want a telehealth POS and no modifier. Some want both. Some pay telehealth at the same rate as in-person care and some do not. There is no single national rule across commercial payers, so build a payer-by-payer matrix and review it when a payer publishes a policy update.

Telehealth claim checklist

  • Record where the patient was at the time of the visit. Capture it in the visit note and in the scheduling workflow, because the claim depends on it.
  • Choose POS 10 or 02 from that record. Do not default every telehealth visit to one code.
  • Check the payer’s current rule on modifiers 95, 93 and any payer-specific modifier.
  • Confirm that the service code is on the payer’s covered telehealth list.
  • Confirm that the rendering provider is licensed and enrolled for the patient’s state, and note the provider’s location rules where the payer asks for them.
  • Keep the documentation that supports the technology used and the time, if the code is time-based.

For behavioral health, telehealth is routine, and the code choices are specific. Psychotherapy codes such as 90832, 90834 and 90837, psychiatric diagnostic evaluations such as 90791 and 90792, and add-on codes such as 90785 are commonly billed by telehealth with POS 10 or 02 and a payer-specific modifier. Time documentation and state licensure matter as much as the POS. The mental health billing page covers how those claims are handled in more detail.

How the place of service must match the procedure code

Many codes are written for a specific setting. Payers run edits that compare the code with the POS, and a mismatch denies the line or reduces it. Evaluation and management codes show this clearly:

Setting Typical POS E/M code family (examples)
Office or outpatient visit 11, 19, 22, 49, 02, 10 99202 to 99215
Initial and subsequent inpatient care 21 99221 to 99223, 99231 to 99233
Emergency department visit 23 99281 to 99285
Nursing facility care 31, 32 99304 to 99310
Home or residence visit 12, 13 99341 to 99350 family

Check current code ranges against the AMA CPT book every January, since descriptors and code families are revised. The point of the table is the habit: if a nursing facility visit is sent with an office visit code, or an office visit is sent with POS 21, the claim has an internal conflict. The edit will either reject it, deny it, or, worse, pay it incorrectly and leave it for a later audit.

The same logic applies to procedures. Some payers deny office-based codes when the POS is a hospital, and deny facility-only codes when the POS is an office. Surgical codes that are performed in an ASC (24) usually carry a facility rate for the surgeon and a separate ASC facility payment. A practice that owns an ASC and a practice that operates in someone else’s ASC bill the same professional claim, with different facility arrangements behind it.

Place of service examples by specialty

Each specialty has a few settings where POS mistakes are common. These examples describe patterns, not payer rules; payers differ.

  • Primary care. Office visits in POS 11, home visits in POS 12, assisted living visits in POS 13, nursing facility rounds in POS 31 or 32, and telehealth in 02 or 10. The common error is billing nursing facility visits with an office POS, or the reverse. See the primary care billing page for the wider workflow.
  • Gastroenterology. Endoscopy is performed in an office-based unit, a hospital outpatient department (19 or 22) or an ASC (24). The professional fee changes with each. Anesthesia and pathology claims must carry a matching POS or the payer links them to the wrong facility claim.
  • Dermatology. Biopsies and excisions in the office use POS 11. A dermatologist who also works in a hospital-owned clinic needs a separate location setup, because one NPI with two locations is a frequent source of wrong POS submissions.
  • Orthopedics. Injections and cast work in the office (11), surgery in an ASC (24) or a hospital outpatient department (22 or 19), and postoperative care inside the global period at the original site or the office. The global surgical package has its own rules, so confirm payer treatment of visits during the global period.
  • Pain management. Epidural and nerve block procedures in an office or in an ASC. If the practice performs them in both, each procedure must carry the setting where it was done, because supplies and fluoroscopy are only payable to the practice in a non-facility setting.
  • Cardiology. Diagnostic testing in the office is often billed globally (technical and professional components together) in POS 11. The same test in a hospital splits the professional component to the physician and the technical component to the hospital. A global claim with a hospital POS is an error.
  • Urgent care. POS 20 applies to locations that meet the definition of an urgent care facility. Payers set their own rules for how to bill urgent care, including facility fee arrangements, so confirm how each contract defines it. See urgent care billing.
  • Dental. Dental claims use the ADA claim form and CDT codes, and the form carries a place of treatment field that uses the same two-digit code set. Dental offices bill most work as an office (11), with hospital and nursing facility settings used for patients treated there. Medical-benefit dental claims follow medical rules. See dental billing.

What goes wrong: common POS errors, causes and fixes

Error Why it happens Typical result Fix
POS 11 on a hospital-based clinic claim Charge master was never updated after acquisition or affiliation. Overpayment, later recoupment. Review the location setup. Identify the affected date range, correct and refund where required.
POS 22 or 19 on a true office claim Staff copied the hospital template to office visits. Lower payment than owed, no denial. Correct the location default. Rebill within the payer’s timely filing and corrected claim limits.
Telehealth visit billed with POS 11 EHR default; scheduling does not capture patient location. Denial, or payment at the wrong rate. Add a patient location field to the telehealth workflow. Use 02 or 10 from it.
POS 02 and 10 swapped Staff do not know the difference. Wrong rate or payer edit. Train on the home versus not-home test. Add a claim scrubber rule.
E/M family does not match POS Provider picks a code from a favorites list. Line denial. Build a POS to code family edit in the scrubber.
Rendering location not on payer file New site opened without updating enrollment. Denial for provider or location not enrolled. Complete enrollment or revalidation. See credentialing.
Global billing in a hospital Technical component not split. Duplicate payment with the hospital, or denial. Bill the professional component with modifier 26, or the global in the office only.
Unlisted POS 99 used by habit Staff unsure of the right code. Denial or manual review. Use a specific code. Reserve 99 for true “other” settings.

How to audit your place of service coding step by step

A POS audit takes one report and a few hours. The goal is to compare what you billed with where the care was delivered.

  1. List your locations. Write every site where a clinician sees patients, with its legal classification (private office, hospital outpatient on or off campus, ASC, clinic, facility, telehealth).
  2. Pull a claim report by POS and CPT. Export the last 6 to 12 months of paid claims with the POS code, the procedure code, the rendering provider and the location.
  3. Sort by location. For each site, the POS column should show one code, plus the telehealth codes. Any other value deserves a look.
  4. Sort by provider. Providers who work at more than one site are the highest risk. Compare their schedule with the POS they billed.
  5. Compare payment by POS. For the top 20 procedure codes, check the allowed amount against the fee schedule or contract for the POS billed. Large gaps point to wrong codes or wrong contracts.
  6. Check telehealth. Match telehealth claims to visit records. Look for telehealth visits billed as POS 11 and for in-person visits billed as 02 or 10.
  7. Check remittances. Search the remittance for denial codes related to place of service or facility, and note the payers involved.
  8. Document and correct. Record each error pattern, its cause, the date range and the number of claims. Decide with a compliance contact which claims need a corrected claim, an appeal or a refund.

If you find overpayments, handle them under the payer’s rules and with your compliance advisor. Medicare has rules on identifying and returning overpayments, and payer contracts have their own. That decision belongs to the practice and its counsel, not to a billing vendor.

Prevention: build the right code into the workflow

People should not choose a POS from memory at claim entry. The code should come from the system.

  • Location-driven defaults. Each practice location in the practice management system carries a default POS. The visit inherits it. Staff change it only for exceptions such as a home visit or telehealth.
  • Telehealth patient location capture. Add a required field at check-in for telehealth: patient at home, or at another site. The claim reads the answer.
  • Scrubber rules. Add edits for POS and code family conflicts, for telehealth codes with a non-telehealth POS, and for facility-only codes with an office POS.
  • Charge master review. Review it every January and at every change in ownership, lease, or affiliation.
  • Payer matrix. Keep a one-page table of each payer’s telehealth POS and modifier rules, with a date for the last review.
  • Training. Train front desk and coders on the home test (POS 10) and the provider-based test (POS 19 and 22).

How to measure whether POS errors are under control

Metric How to calculate What it tells you
Claims with POS mismatch edits Claims flagged by the scrubber for POS and code conflicts, divided by claims submitted. How often staff create conflicts at entry.
POS-related denials Denials with place of service or facility reason codes, by payer and month. Which payers catch your errors.
Telehealth claim accuracy Sample of telehealth claims checked against visit records. Whether POS 02 and 10 are chosen correctly.
Rate variance by POS Average paid amount on top codes by POS, compared with expected. Silent underpayments and overpayments.
Location setup age Months since each location’s POS default was last verified. Whether the charge master is stale.

Track these monthly and compare them to your own baseline. Do not compare your numbers to a generic benchmark; payer mix and specialty make public averages unreliable for a single practice. For related measures see the guide to clean claim rate and days in A/R.

What Mednex handles and what the practice handles

When a practice works with Mednex on medical billing, the responsibilities split along a clear line.

Mednex process Practice responsibility
Reviews claims for POS and code conflicts before submission and flags exceptions. Tells Mednex where each provider practices and which locations are provider-based to a hospital.
Maintains a payer-by-payer note of telehealth POS and modifier rules from payer sources. Captures the patient’s location for every telehealth visit in the record.
Reports POS-related denials and the pattern behind them. Keeps provider enrollment and location records current with payers.
Prepares corrected claims where the record supports the change. Decides on overpayment refunds with its compliance advisor.

Mednex cannot decide whether a location is provider-based, make clinical documentation judgments, give legal advice, or guarantee payment. Those depend on the facts of the site, the documentation and each payer’s decision. Details of the working arrangement, including how records are accessed and how any patient data is protected, are confirmed during onboarding and covered in a signed agreement.

Next steps if you suspect place of service errors

Start with one list: every location where your providers see patients, and the POS code your system uses for each. If the list has surprises, pull a six-month claim report and run the audit steps above. A practice that wants a second set of eyes can request a free medical billing audit, where Mednex reviews a sample of recent claims, denial reasons and A/R by payer and sends back a written summary. For related reading, see why medical claims are denied and the overview of denial management. You can also contact Mednex with questions about how the process works.

General information only

This guide is educational. It is not legal, coding, compliance or clinical advice. Rules differ by payer, plan, state and contract, so confirm against the payer's current policy before acting.

Frequently asked questions

What is a place of service code in medical billing?

A place of service code is a two-digit code on a professional claim that tells the payer where the patient was when the service was delivered, such as office (11), home (12), inpatient hospital (21) or telehealth (02, 10). CMS maintains the code set. Payers use it to choose between facility and non-facility pricing and to check that the procedure fits the setting. It follows the patient's location, not the clinician's own office. On a CMS-1500 or 837P the code sits at the service line level, so one claim can carry different codes for different lines. Set each location's default in the practice management system so staff do not pick it from memory, and review it when a lease, ownership or affiliation changes.

What is the difference between POS 11 and POS 22?

POS 11 is a physician or practitioner office that is not part of a hospital. POS 22 is an outpatient department on a hospital's main campus. In POS 11 the practice carries the room, equipment and staff costs, so Medicare pays the non-facility amount. In POS 22 the hospital bills a separate facility fee and the professional claim is paid at the lower facility amount. Ownership and provider-based status decide which applies, not how the room looks. A quick test is who pays for the space and staff. If the practice does, and no hospital bills a facility fee for the visit, 11 usually fits. If a hospital bills the facility side, expect 19 or 22. Confirm the practice's status with the hospital and the payer instead of guessing from signage.

When do I use POS 19 instead of POS 22?

Use POS 19 when the service happens in a provider-based hospital outpatient department that is located off the hospital's main campus. Use POS 22 for departments on campus. Both are facility settings, so the professional claim is paid at the facility rate and the hospital also bills its own claim. If you are unsure whether a clinic is provider-based, ask the hospital's revenue cycle or compliance team and check the location record on file with the payer. The practical effect is two claims for one visit: yours for the professional service and the hospital's for the facility. Patients may also see two cost-sharing amounts. Tell front-desk staff how to explain this, because it often surprises patients and generates billing calls.

What is the difference between POS 02 and POS 10 for telehealth?

POS 10 is telehealth provided in the patient's home. POS 02 is telehealth provided somewhere other than the patient's home, such as a clinic or facility. Under recent Medicare fee schedule rules, POS 10 is priced at the non-facility rate and POS 02 at the facility rate. Commercial payers differ, and some also want a modifier such as 95. Capture where the patient was at each visit, and check each payer's current policy. Medicare has changed telehealth coverage rules several times, so check the current CMS guidance and each commercial payer's policy before assuming a code or modifier is accepted. Keep the patient's location in the visit note, because the claim code is built from that fact and cannot be reconstructed later.

Does the place of service change how much I get paid?

Yes. Many codes have separate facility and non-facility amounts on the Medicare fee schedule, and many commercial payers copy that structure. The same procedure can pay less in a hospital outpatient setting than in a private office because the hospital bills for overhead. A wrong code can therefore underpay you, or overpay you and create a refund liability that appears later in a payer audit. Compare paid amounts by POS for your top codes. Check this with a small test. Pick a few high-volume procedures, pull allowed amounts by place of service from your remittances, and compare them with the fee schedule. A gap that matches the facility and non-facility difference usually means the code, not the payer, drove the payment.

What happens if I bill the wrong place of service?

Outcomes range from a denial to a silent payment error. The payer may reject a code that does not fit the setting, pay at the wrong rate, or match your claim to a hospital facility claim and flag a conflict. Overpayments can be recouped later, and underpayments usually go unnoticed. Correct the claim if you are inside the payer's corrected claim window, and ask your compliance advisor how to handle any refund. Do not resubmit blindly. Work out whether the error was yours, then check the payer's corrected claim process and deadline. If money was overpaid, document what you found and let your compliance advisor or counsel decide how and when to report and refund. Mednex does not give legal advice.

Which POS code should I use for a hospital-owned clinic?

Use 19 or 22 if the clinic is a provider-based department of a hospital, depending on whether it is off or on campus. Use 11 only if it is a physician office that is not provider-based. A hospital name on the sign does not settle it. Check the hospital's provider-based status, the payer enrollment record and whether the hospital sends a facility claim for the same visit. Ask the hospital for its written provider-based determination and compare it with how the payer lists your location. If they disagree, resolve the enrollment record before billing more claims, since the mismatch will repeat on every visit until corrected.

Do dental claims use place of service codes?

Dental claims use the ADA claim form and CDT procedure codes. The form includes a place of treatment field that uses the same two-digit code set, such as 11 for office, 21 for inpatient hospital or 32 for nursing facility. Dental benefits and medical benefits are separate, so a procedure billed to medical insurance follows medical rules instead. Check the specific form version and the plan's instructions. Related fields matter too. Dental claims carry the treating provider's license and NPI, the CDT code and tooth or surface details, and they go to dental benefits with their own limits. When a plan covers an oral surgery procedure under medical benefits, the claim moves to the medical form and uses CPT and place of service rules.

How do I audit place of service errors in my practice?

List every location with its true classification. Export 6 to 12 months of claims with POS, CPT, provider and location. Check that each location shows the expected code, and look closely at providers who work at several sites. Compare paid amounts for your top codes by POS, and match telehealth claims to visit records. Group the errors by cause, then fix the location defaults before rebilling anything. Keep the audit simple and repeatable. Record the sample size, the error types found, the dollar effect and the fix owner. Run it again after the location defaults are corrected, so you can see whether the error rate fell, and do it again after any change in ownership, lease or providers.

Can a billing company fix place of service coding for me?

A billing team can scrub claims for POS and code conflicts, track payer rules, report denial patterns and prepare corrected claims. It cannot decide whether a site is provider-based, judge clinical documentation, give legal advice or decide on refunds. The practice supplies the facts about its locations and providers, and its compliance advisor makes the refund decisions. Mednex starts with a review of recent claims and payer rules. Request a sample review before agreeing to scope. The free medical billing audit looks at recent claims, denial reasons and payment patterns, and flags POS-related problems alongside other findings. Mednex cannot guarantee payer decisions or recovery, and the practice stays responsible for accurate location facts.

Sources

Want this reviewed against your own claims?

The free medical billing audit looks at a sample of your recent claims, denial reasons and A/R aging. You get a written summary and a walkthrough call.

Do not include patient names, insurance IDs or clinical details. If records are needed later, we set up a secure way to share them.