Free Medical Billing Audit

Specialty billing

Nephrology Billing Services for Kidney and Dialysis Practices

Nephrology billing services cover the claims work specific to kidney care: monthly capitation payments for dialysis patients, chronic kidney disease visits, vascular access procedures, hospital consults and rounding, and the Medicare rules that tie them together. Most nephrology revenue problems come from visit counts that do not match the code billed, a patient’s age on the wrong date, or a service reported under the wrong setting. Mednex Group provides nephrology billing support as process and responsibility, and cannot promise payer decisions or reimbursement.

Physician with a stethoscope seated at her desk
On this page
  1. What nephrology billing involves
  2. Who this affects
  3. The ESRD monthly capitation payment
  4. Codes by age and visit count
  5. What the record must show
  6. Common MCP traps
  7. Home dialysis and partial months
  8. Transient patients and changes in modality
  9. Place of service in nephrology
  10. CKD, consults, and hospital visits
  11. Hospital consults and rounding
  12. Care management and chronic disease programs
  13. Vascular access and procedures
  14. Checks before billing a procedure
  15. Medicare, secondary payers, and coordination
  16. Secondary claims
  17. A month-end workflow for dialysis billing
  18. Exceptions to plan for
  19. Working nephrology denials
  20. Problem and evidence to inspect
  21. Likely causes and corrective action
  22. Prevention
  23. How Mednex supports nephrology practices
  24. Records and access needed
  25. How progress is measured
  26. What cannot be guaranteed
  27. What to check before you hire a nephrology billing company
  28. Next steps

What nephrology billing involves

A nephrology practice sees patients across the whole disease course. Some are early in chronic kidney disease (CKD) and are seen in the office for evaluation and management. Some are acutely ill in the hospital. Some are on dialysis, in a center or at home, and are seen monthly or more often. Each setting has different codes, different documentation, and different payers.

The core of the work is the same revenue cycle described on the medical billing services page. Nephrology adds four layers:

  • Monthly capitation payment (MCP) for dialysis care, billed once per month under age and visit-count rules
  • Medicare as the dominant payer, because Medicare covers most people with end-stage renal disease (ESRD)
  • Procedures such as vascular access evaluation and maintenance, often with local coverage determinations
  • Several places of service in the same week: office, dialysis facility, home, and hospital

If your practice is mainly primary care or internal medicine with some nephrology, also see internal medicine billing services.

Who this affects

  • Nephrology groups that round at several dialysis facilities
  • Solo nephrologists who manage CKD and a small dialysis census
  • Practices that support home dialysis programs
  • Groups with nurse practitioners and physician assistants who share dialysis visits
  • Practices that bill both hospital consults and outpatient clinic visits
  • Groups that lost a biller and now carry months of unbilled monthly claims

The monthly cycle is the first thing to break when staff changes. A missed month cannot be fixed by next month’s work, and the delay can run into timely filing limits that differ by payer.

The ESRD monthly capitation payment

For outpatient dialysis patients, Medicare pays the nephrologist or qualifying practitioner a monthly capitation payment that bundles the physician’s ongoing dialysis-related care. Per Medicare contractor guidance, the MCP is billed once per calendar month, paid after the month ends, and reported on a CMS-1500 claim with a day or unit count of one. The service span for the first month runs from the dialysis start date through the end of the month.

Codes by age and visit count

For patients aged 20 and older receiving center-based dialysis, the code depends on the number of face-to-face visits in the month. The age is the patient’s age at the end of the month. Younger patients use different code groups in the same family, so verify the code range for each age group in the current CPT book.

Visits in the month (age 20 and older) Code Note
Four or more face-to-face visits 90960 Highest payment tier
Two or three visits 90961 Middle tier
One visit 90962 Lowest tier

Medicare contractors state that these codes are billed only once per calendar month and that the billing practitioner must personally see the patient at least once in the month. Other practitioners in the same group can furnish additional visits, and the contractor guidance describes who qualifies, including partners, employees of the same group, and employees of the MCP physician or practitioner. Check the current language with your Medicare Administrative Contractor before relying on a group arrangement.

What the record must show

  • A signed note for every face-to-face visit in the billing period
  • At least one visit that includes a clinical exam of the vascular access site
  • Evidence that the billing practitioner completed the assessment, set the plan of care, and performed at least one visit
  • Records that support the visit count for the code billed

Medicare guidance states that late signatures should not be added to visit notes, and that the attestation process described by CMS is used when a signature is missing. A missing signature on one visit can drop a month from the four-visit tier to the two-visit tier, so signature checks belong before billing, not after a denial.

Common MCP traps

  • Counting visits that do not qualify. A phone call or a visit by a practitioner outside the group does not count.
  • Wrong age group. A patient who turns 20 during the month is billed by age at month end.
  • Two practitioners billing the MCP. Only one MCP is paid per patient per month, so two claims create a denial for one of them.
  • Billing before month end. The claim is not payable until the month is complete.
  • Mixing inpatient time. Dialysis furnished to hospital inpatients is paid under Part A rules and not the Part B monthly capitation, according to contractor guidance.

Home dialysis and partial months

Home dialysis uses its own code groups. According to Medicare contractor guidance, full-month home dialysis is reported once per month by age group (90963 through 90966), and per-day codes (90967 through 90970) are used when a month is partial. One example in the guidance is a patient on home dialysis for 14 days who is then hospitalized for the rest of the month: the practice bills the age-appropriate per-day code for 14 units, and the MCP physician must document a face-to-face visit.

Home dialysis requires at least one face-to-face visit per month, and contractor guidance lists documentation the record should hold: a signed order, evidence of home dialysis training, the method, frequency, and patient tolerance, and laboratory results for the current and previous month.

Transient patients and changes in modality

Patients who travel, change facilities, switch between center and home, or move in and out of the hospital create partial-month billing. Per the contractor guidance, for a transient patient the practitioner who cares for the patient bills the days under their care, and the MCP physician may bill the days with documented face-to-face visits. Keep a monthly census that shows start and stop dates of each setting. That census is the best defense when two practices claim the same month.

Hypothetical example. A patient receives center-based dialysis for the first 20 days of a month and then switches to home dialysis. The practice sees the patient twice in the first period and once at home training. The biller needs to decide whether to bill a monthly code or day-based codes, which depends on how the payer and the CPT rules treat the mixed month. The right answer comes from the contractor’s instructions for that situation, not from an assumption. The numbers are an illustration of the planning step, not a result.

Place of service in nephrology

CMS defines place of service 65 as an end-stage renal disease treatment facility: a non-hospital facility that provides dialysis, maintenance, or training for patients or caregivers, either in an outpatient setting or at home. POS 11 covers the office, POS 21 inpatient hospital, and POS 22 and 19 outpatient hospital settings. A nephrology practice often uses several of these in the same week, and a wrong POS can lead to an incorrect payment or a denial. See place of service codes in medical billing for a full table.

Practical rules:

  • Record the setting at the time of the visit, not at billing time.
  • Keep a facility list with each facility’s NPI, tax ID, and the billing instructions the MAC gives for that site.
  • Confirm how each payer wants home dialysis visits reported.
  • Do not report a hospital inpatient visit with the dialysis facility code.

CKD, consults, and hospital visits

Outside dialysis, nephrologists bill ordinary evaluation and management services. For CKD, that means established and new patient office visits, selected by medical decision making or total time under the current CPT office visit guidelines. A note that shows the stage of CKD, the labs reviewed, the medication adjustments, and the plan supports the level. Diagnosis coding for CKD uses the ICD-10-CM codes that reflect the stage, so a note that says only “CKD” can produce an unspecified code and weaken medical necessity.

Hospital consults and rounding

Hospital work includes initial consults, subsequent hospital care, and critical care in some cases. Payers differ on whether they pay consultation codes. Medicare, for example, does not pay the consultation code family and expects other E/M codes, while some commercial plans still accept them. Check each payer’s policy. Time and decision making must come from the same date. Splitting a day across multiple settings (clinic in the morning, hospital in the afternoon) is fine as long as each service has its own note.

Care management and chronic disease programs

Nephrology practices sometimes add care management for CKD patients. These services use specific codes and consent rules, and a patient generally cannot be billed for overlapping care management services by two practitioners in the same period. Check the payer’s rules, and see the revenue cycle management page for the broader workflow that supports it.

Vascular access and procedures

Some nephrologists evaluate, maintain, and sometimes create or repair dialysis access, such as fistulas and grafts, through procedures in an office-based lab, ASC, or hospital outpatient department. These services are the part of nephrology most likely to have a local coverage determination. For example, one Medicare contractor has a policy titled Dialysis Access Maintenance. LCDs differ by jurisdiction, so find the one your MAC publishes and read the diagnosis, frequency, and documentation requirements.

Checks before billing a procedure

  1. Identify the setting (office, ASC, outpatient hospital) and the matching place of service.
  2. Match the procedure code to the operative report, including laterality and the vessel or circuit treated.
  3. Check NCCI edits for bundled imaging and for pairs that need a modifier. The unbundling article explains the logic.
  4. Confirm the diagnosis code meets the LCD and the payer’s medical necessity policy.
  5. Check prior authorization requirements for commercial plans and Medicare Advantage.
  6. Confirm the same-day E/M is separately identifiable, if billed.

The physician owns the operative report and the medical necessity judgment. Mednex can compare the report with the claim and send questions back to the provider.

Medicare, secondary payers, and coordination

Medicare Part B pays 80 percent of the allowed amount after the Part B deductible, and the patient owes the deductible and coinsurance, according to contractor guidance. Many dialysis patients also have a Medicare supplement, Medicaid, or a commercial plan, so coordination of benefits is a large part of the work. For people with ESRD who also have employer group coverage, there is a coordination period in which the employer plan may be the primary payer for a defined time. Confirm the current rule and the patient’s dates on CMS.gov and with the plan before billing in that period.

Secondary claims

  • Verify the order of payers for each patient, and record the effective dates.
  • Post the primary payment and the adjustment correctly so the secondary claim is accurate.
  • Track Medicare Advantage enrollment, because a patient who moves into an Advantage plan changes who pays the MCP and what rules apply.
  • Track Medicaid eligibility monthly, because dual-eligible status can change.

Medicare Advantage plans often have their own authorization and claim rules, and may pay the MCP under a contract rate. Check each plan’s provider manual, and keep a payer rules sheet for dialysis.

A month-end workflow for dialysis billing

Because the MCP is billed once a month and depends on the whole month’s record, a fixed month-end routine prevents most errors. A workable order of steps looks like this:

  1. Build the census. List every patient seen in the month, with facility, modality (center or home), start and stop dates, and payer order.
  2. Pull the visit log. For each patient, list each face-to-face visit with date, practitioner, and setting. Remove anything that was a phone call or came from a practitioner outside the qualifying group.
  3. Check signatures. Confirm every visit note is signed and dated by the practitioner who saw the patient. Route gaps to the provider the same day.
  4. Confirm the vascular access exam. At least one visit in the month should document the access exam. Missing exams go to the provider as a query.
  5. Set age and code. Calculate age at month end, count qualifying visits, and select the code family and tier for that age and count.
  6. Check for admissions. Compare the census with hospital admission dates so inpatient days are not billed as outpatient dialysis.
  7. Select the billing practitioner. Confirm which practitioner completed the assessment and plan of care, and bill under that practitioner’s enrollment.
  8. Submit after month end. Send the claim once the month is complete, and track it by patient so no one is skipped.

Keep the checklist as a saved file for each month. When a payer audits a month, the file shows how the visit count was built. When a code is denied, the same file shows where the problem began.

Exceptions to plan for

  • A patient who dies, transfers, or receives a transplant mid-month, which changes the service span and may change the code.
  • A patient who starts dialysis late in the month, where the first service span begins at the start date.
  • A patient who moves between your practice and another practice’s census.
  • A practitioner who leaves the group in the middle of the month, with visits that still need signatures.

In each case, read the Medicare contractor’s guidance for the exact situation, and write the answer into your payer rules sheet.

Working nephrology denials

Problem and evidence to inspect

Start with the remittance advice and group by reason code and payer. Then compare each denied MCP with the visit log for the month, the signed notes, the patient’s age at month end, and the dialysis modality for that period.

Likely causes and corrective action

Denial pattern Likely cause Corrective action
Duplicate MCP Two practitioners billed the same month Identify the MCP practitioner, resolve who bills, correct claims
Visit count not supported Unsigned notes or visits by a non-qualifying practitioner Check signatures and group affiliation, use the attestation process if allowed
Wrong code for age Age taken at the wrong date Recalculate age at month end, correct and resubmit
Service during inpatient stay Dialysis during a hospital stay billed as outpatient Review the admission dates, bill the right service
Medical necessity on access procedure Diagnosis or frequency does not meet the LCD Review LCD, supply records if supported, appeal if appropriate
Coordination of benefits Wrong primary payer on file Update coverage order, rebill
Provider not enrolled New practitioner or site not in the payer file Fix enrollment, ask about effective date rules

Timely filing and appeal windows vary by payer and contract. Read the payer’s current manual. For the full denial workflow, see denial management services.

Prevention

  • A month-end checklist: visit count, signatures, vascular access exam, age, modality, and setting.
  • A census that shows each patient’s facility, start date, and payer order.
  • A pre-bill scrub for age and code match.
  • A monthly check for unbilled patients, so no one is missed.

How Mednex supports nephrology practices

Task Practice Mednex
Visit notes, signatures, and clinical judgment Owns Reviews and flags gaps
Monthly visit logs by patient Supplies schedules and rounding records Builds the month-end check and bills
Eligibility and coordination of benefits Supplies patient information Verifies and tracks payer order
Procedure claims and authorization Provides operative reports and clinical details Prepares claims, tracks authorization
Payment posting, denials, secondary claims Reviews reports Posts, corrects, follows up
Enrollment and facility setup Signs and supplies attestations Prepares applications, tracks status

Records and access needed

  • EHR or practice management access, or report exports, agreed with you
  • Facility list and monthly rounding or visit logs
  • Payer list, contracts, and MAC jurisdiction information
  • A/R aging report, denial and remittance reports

Patient information moves only through a secure workflow under a signed business associate agreement, and never through the website form.

How progress is measured

  • MCP billing completeness: the number of active dialysis patients compared with the number of MCP claims each month
  • MCP denial rate by payer and reason
  • Days in A/R and A/R over 90 days. See clean claim rate and days in A/R
  • Charge lag for hospital and office visits
  • Secondary claim lag after primary payment
  • Procedure denials tied to medical necessity

What cannot be guaranteed

Mednex cannot guarantee reimbursement, payer coverage decisions, appeal results, or enrollment timelines. Medicare and other payers set the rules and decide payment.

What to check before you hire a nephrology billing company

  1. Ask how they build and check the monthly MCP list against the dialysis census.
  2. Ask how they handle partial months and modality changes.
  3. Ask how they check signatures and vascular access exams before billing.
  4. Ask who handles secondary and coordination of benefits claims.
  5. Ask for reports and cadence in writing.
  6. Ask for the pricing model in writing. See outsourcing medical billing versus in-house for the broader decision.
  7. Confirm a signed BAA before any patient data is shared.

Next steps

Begin with a Free Medical Billing Audit. For practices that bill US payers, Mednex reviews a de-identified or secure-portal sample of recent claims, denial and rejection reasons, A/R aging by payer, and charge capture gaps. You receive a written findings summary and a walkthrough call, with no obligation. You supply report exports such as an A/R aging report, a denial or remittance report, and a payer list. Legal review, payer contract negotiation, clinical documentation judgments, and guaranteed recovery are outside the audit.

For a question about a specific payer or denial pattern, use the contact page without patient information. Other service lines are on the specialties page, and you can request the audit any time.

Frequently asked questions

What is the ESRD monthly capitation payment?

It is a monthly payment, known as the MCP, that Medicare makes to the nephrologist or qualifying practitioner for ongoing dialysis-related care of an outpatient dialysis patient. It is billed once per calendar month and paid after the month ends. For patients aged 20 and older receiving center-based dialysis, the code depends on the number of face-to-face visits in the month: 90962 for one visit, 90961 for two or three, and 90960 for four or more. Younger patients use other codes in the same family, so check the current CPT book. Because the claim is paid after the month closes, a missed month does not fix itself, so a monthly list of every active patient compared with the claims sent is the simplest safeguard.

How many visits are needed to bill each MCP tier?

For patients aged 20 and older, Medicare contractor guidance ties 90962 to one face-to-face visit, 90961 to two or three visits, and 90960 to four or more visits in the month. At least one visit must include a clinical exam of the vascular access site, and the billing practitioner must personally see the patient at least once. Other qualifying practitioners in the same group can furnish the remaining visits. Every visit needs a signed note, so one unsigned note can lower the tier. Keep a visit log that lists each visit, the practitioner, and the signature date, so the count behind the code can be shown if the payer asks for records.

Which age is used to pick the MCP code?

Medicare contractor guidance states that the patient's age at the end of the month determines the code group. A patient who turns 20 during a month is therefore billed under the 20 and older group for that month. Build the age check into your month-end routine rather than relying on the age shown on the first visit, because a wrong age group produces a code mismatch denial that takes extra work to correct. Many billing systems calculate age from the first visit date, so test your system with a patient who changes age groups during a month before you trust its default.

How is home dialysis billed differently?

Home dialysis has its own code groups. Per contractor guidance, a full month is reported once by age group using 90963 through 90966, and partial months use per-day codes 90967 through 90970, billed with one unit per day. Home dialysis requires at least one face-to-face visit in the month. The record should include the signed order, training evidence, method, frequency, patient tolerance, and laboratory results for the current and previous month. Check your Medicare Administrative Contractor for the current language. Keep a simple monthly record of start and stop dates for each setting, because that record settles questions when a patient moves between center, home, and hospital.

Can two practitioners bill the MCP for the same patient in one month?

No. Only one MCP is paid per patient per month, so two claims for the same month result in a denial for one of them. The practitioner who completes the assessment, sets the plan of care, and manages ongoing care should bill, and visits by other practitioners count only if they are partners, employees of the same group, or employees of the MCP practitioner. Transient patients are a special case, and the practitioner caring for the patient bills the days under their care. When two practices both bill, the payer will usually pay the first claim it receives, so early communication with the other practice prevents a lengthy dispute.

What place of service is used for dialysis visits?

CMS defines place of service 65 as an end-stage renal disease treatment facility, a non-hospital facility that provides dialysis, maintenance, or training for patients or caregivers in an outpatient setting or at home. Office visits use POS 11, inpatient hospital visits use POS 21, and outpatient hospital visits use 19 or 22. Record the setting at the time of the visit and confirm how each payer wants home dialysis reported, since instructions differ. Hospital and office work in the same week should carry separate notes and separate places of service, even when the same physician sees the patient in both settings.

Are hospital dialysis visits billed under the monthly capitation?

Not under the Part B monthly capitation, according to Medicare contractor guidance. Dialysis furnished to hospital inpatients is paid under the applicable Part A rules, and the nephrologist's professional services during an admission are billed with hospital E/M codes. When a patient is admitted during the month, the days in the hospital affect the dialysis billing for that month, so keep a census with admission dates and check it before submitting. Ask the practice's Medicare Administrative Contractor for its current guidance on the hospital and dialysis overlap, because contractors phrase their instructions differently.

Which nephrology procedures have the most coverage rules?

Dialysis access maintenance and related vascular procedures are the area most likely to have a local coverage determination. Medicare contractors publish these policies by jurisdiction, and they list covered diagnoses, documentation, and sometimes frequency limits. Commercial plans and Medicare Advantage plans may add authorization requirements. Match the procedure code to the operative report, check NCCI edits for bundled imaging, and confirm the diagnosis meets the policy that applies to your contractor before billing. Prior authorization may also apply to access procedures on commercial and Medicare Advantage plans, so check requirements by payer, code, and site of service at scheduling.

Why are nephrology claims denied when the patient has several payers?

Coordination of benefits is a common cause. Dialysis patients often have Medicare, a supplement, Medicaid, or an employer plan, and the order of payers can change, including when a patient moves into a Medicare Advantage plan. For people with ESRD who also have employer group coverage, a coordination period may make the employer plan primary for a time, so confirm the current rule and the patient's dates. A claim sent to the wrong primary payer is denied, and the correction takes weeks. Record coverage effective dates and payer order in the patient account, and recheck them at the start of each year, when plan changes cluster.

How is nephrology billing priced and how soon do results show?

Pricing depends on scope, patient census, procedure volume, and which tasks are included, and Mednex does not publish rates here. Ask any vendor for the pricing model in writing, and what is extra. Results depend on payer turnaround, how much unbilled or aged A/R exists, and how many problems start with documentation. Early signals are fewer MCP denials and a complete monthly list of billed patients in your own reports, and no vendor can promise a collection result. Ask what is included for secondary claims, denial appeals, and enrollment support, and how often you receive reports, since those details differ more than the headline price.

Sources

Payer rules vary by payer, plan, state and contract. Check the current policy before acting.

See where your revenue cycle stands

Request the free medical billing audit. You receive a written summary of findings and a walkthrough call. No obligation, and no patient information is needed to start.

Do not include patient names, insurance IDs or clinical details. If records are needed later, we set up a secure way to share them.